The first image shows a Single Solid White line down the center of the road. When a solid and a broken yellow line are together you must not pass if you are driving next to the solid.
Lines that separate lanes of traffic that moves in the same direction are white.
Single solid white line. The right edge of the roadway is marked with a normal solid white line edge line. Yellow Lines and No-Passing Zones. Single dash line white or yellow – ok to change lanes or pass for white.
BC Laws Prohibit Lane Changing It Is Illegal Over Solid White Road Lines Do not change lanes over sold white lines. The solid white line is indicating the exit-only lane So crossing the gore point or shoulder solid white is a no-no. Every day drivers pilot their cars across solid white lines usually when merging on and off freeways or into and out of turn lanes.
Stay to the left of the lines. There may be two lines between lanes and lines can be solid or broken. Lines that separate traffic that moves in opposite directions are yellow.
However if at a particular location a sign has been erected that prohibits the crossing of a single. Single solid white line – these are separation lines indicating the road forks to different routs allowed to change lane with caution if situation requires. If you are on a road with a broken white line down the middle you must.
Broken white lines separate traffic lanes on roads with two or more lanes in the same direction. You may travel in the same direction on both sides of this line but you should not cross the line unless you must do so to avoid a hazard. White lines divide lanes of one-way traffic and yellow lines divide lanes of two-way traffic.
Ok only to pass for yellow. Turning into another road is counted. An edge line that angles toward the center of the road shows that the road is narrower ahead.
They are there for a reason. Road markings are used to direct drivers regarding lane usage road conditions and passing safety. Drive as close to the left side of the road as you can.
You may pass on a two-way road if the yellow centerline is broken. Solid single white lines indicate that crossing the line is discouraged but not prohibited. YELLOW LINES mark the center of a two-way road used for two-way traffic.
A yellow center line must always be on your left. You may cross a single solid line to pass other vehicles or change lanes but only if obstructions on the road or in traffic make the lane change necessary. Solid White Line A solid white line marks the right edge of the roadway or separates lanes of traffic moving in the same direction.
Double Solid White Line. Solid white lines mark traffic lanes going in the same direction such as one-way streets. A solid white line at the side of the roadway means drivers are not permitted to cross that line to go around someone turning left from the highway or.
So on both sides of the road left and right solid white line means it is the edge of that roadway. It could be on any side of the road. Double solid line – absolutely no crossing over no matter it is white or yellow.
A single solid white line on the road divides lanes of traffic traveling in the same direction and discourages lane changes. A solid white line means do not change lanes. If there is a yellow line is on your right and a white line on your left you are going the wrong way.
Broken white dividing lines. White line raised ribs Continuous single white line with raised ribs. These are usually found on the approach to intersections crosswalks and certain other spots.
Is it legal to cross a solid white line. Used on the left-hand side of the road and alongside the central reservation of dual carriageway roads. Some motorists firmly believe they arent breaking the law.
A continuous single white line used at the edge of a carriageway other than at junctions exits from private drives and lay-bys. Crossing other solid whites is OK per Prouty. White lines on both sides of road These solid white lines running along the edge of the road indicate the shoulder of the road and let you know that if the line is on your right side youre.
Requires you to stay within the lane and also marks the shoulder of the roadway. Double white lines are two solid white lines that indicate a lane barrier between a regular use and a preferential use lane such as a carpoolHOV. Cross these lines to enter or leave the road.
A continues solid white line means it is the edge of the road. Both of these cars ARE permitted to turn right as you are allowed to cross a Single Solid White Line if you are entering or leaving the road. Overtake or do a U-turn if it is safe the road ahead is clear and you follow all other road rules.